Home > Product > Sand Making Machine >  Vertical Shaft Impact Crusher
Ore Beneficiation

Vertical Shaft Impact Crusher

Feed particle size<50 mm.

Processing capacity60-520tph.

Applicable materialRiver pebble, limestone, granite, basalt, diabase, andesite,silica, etc., ore tailings, artificial sand making of stone chips, etc..

WhatsAPP

We will provide you with the best quality service.If you are interested in our product,
you can contact us.
jacker@cfcmining.com Send Enquiry

Vertical shaft impact crusher is widely used in crushing and reshaping of rock and artificial sand making. It is suitable for crushing of fragile materials below level 9 of Moh’s hardness rather than viscous materials or stone materials containing much solid.

Vertical Shaft Impact Crusher

1.Good grain shape, reasonable sand grading;
2.Integrate the function of sand making and granule shape optimizing;
3.Unique design, easy maintenance;
4.High-performance production efficiency, low power consumption.

Parameters

Model Capacity  Max. feeding size Rotating speed
(r/min)
Power of double motor
(kW)
Overall dimensions
(mm)
Weight (t) Voltage (v)
      Feed at center and at sides  
(tph)
Feed at center (tph) Feed at center and at sides  
(mm)
Feed at center (mm)
VSI-7611 120-180 60-90 35 3 1700-1890 110 3700×2150×2100 11.8 380V
VSI-8518 200-260 100-130 40 35 1520-1690 180 4140×2280×2425 14.5 380V
VSI-9526 300-380 150-190 45 40 1360-1510 264 4560×2447×2778 17.8 380V
VSI-1140 450-520 225-260 50 45 1180-1310 400 5000×2700×3300 25.6 380V

Principle

The material falls vertically from the upper part of the machine into the impeller which rotates at high speed. Under the action of high-speed centrifugal force, the material which is distributed around the impeller in another form in the form of an umbrella produces high-speed impact and pulverization. After the materials collide with each other at high speed, they will collide with each other in the form of eddy currents between the impeller and the casing, rubbed and pulverized, and then discharged straight from the lower part to form a closed circuit for multiple cycles. Finally controlled by the screening equipment to achieve the required finished product size.

The material falls vertically from the upper part of the machine into the impeller which rotates at high speed. Under the action of high-speed centrifugal force, the material which is distributed around the impeller in another form in the form of an umbrella produces high-speed impact and pulverization. After the materials collide with each other at high speed, they will collide with each other in the form of eddy currents between the impeller and the casing, rubbed and pulverized, and then discharged straight from the lower part to form a closed circuit for multiple cycles. Finally controlled by the screening equipment to achieve the required finished product size.   1. The raw material enters the jaw crusher through the feeder to perform the first-stage crushing.  2. After the first stage crushing, the stone enters the cone crusher  through the conveyor belt for secondary crushing.  3. After the secondary crushing, the stone enters the impact crusher through the conveyor belt for three-stage crushing.  4. After the third-stage crushing, the finished product enters the screening machine through the conveyor belt for screening of different sizes.

1. The raw material enters the jaw crusher through the feeder to perform the first-stage crushing.

2. After the first stage crushing, the stone enters the cone crusher  through the conveyor belt for secondary crushing.

3. After the secondary crushing, the stone enters the impact crusher through the conveyor belt for three-stage crushing.

4. After the third-stage crushing, the finished product enters the screening machine through the conveyor belt for screening of different sizes.

Faq-may you want to kown

Q1. How long is the warranty of your equipments? Does your company supply the spare parts?

The warranty period of crusher equipments is 12 months. Yes, we supply the spare parts for you at lowest cost and we have a professional after-sale service team to promptly and thoroughly solve your problems.

Q2. What Information should customers give us? So that we can be able to provide you suitable solution and equipments.

1. What's the capacity you prefer? ( such as 150TPH etc ) 2. What is the raw material you want to process? ( such as andesite, basalt, etc ) 3. What is the input size of your raw material? 4. What's the final product size do you want?

Q3. Can you test our samples? Do you provide beneficiation flow chart?

Yes. You can send your samples to us for test and analysis. Our experienced engineers are specialized in designing process flow for various ores beneficiation, including iron ore, tin ore, copper ore, gold ore, lead zinc ore, manganese ore, etc.

Q4. If I need the complete crushing plant can you help us to build it?

Yes, we can help you combine a complete crushing line and give you related professional advices as long as you need. We had already build many mining projects in China & Overseas.

Send Enquiry

Please enter your requirement and contact information and we'll get back to you as soon as possible.

Your Email
Your Phone/Whatsapp *
Country
Product
Message

30 seconds for connecting online customer service

within 24 hours for getting email reply

factory-direct sale, 100% factory price

Top