Home > Product > Grinding Machine >  YGM High Pressure Grinding Mill
Ore Beneficiation

YGM High Pressure Grinding Mill

Max Feeding size0-35mm.

Capacity0.4-22 t/h.

Applicable materialQuartz, feldspar, calcite, talc, barite, fluorite, rare earth, marble, ceramic, bauxite, manganese ore, iron ore, copper ore, phosphate rock, iron oxide red, slag, water slag, cement clinker , activated carbon, dolomite, granite, garnet, iron oxide yellow.

WhatsAPP

We will provide you with the best quality service.If you are interested in our product,
you can contact us.
jacker@cfcmining.com Send Enquiry

YGM High Pressure Grinding Mill is referred to as high-pressure mill, which is based on the traditional technology and production experience of Veken Group. YGM High Pressure Grinding Millis mainly used for grinding of metallurgy, building materials, chemical industry, mining and other mineral products. It can grind quartz, feldspar, calcite, talc, barite, fluorite, rare earth, marble, Ceramics, bauxite, manganese ore, iron ore, copper ore, phosphate rock, iron oxide red, slag, water slag, cement clinker, activated carbon, dolomite, granite, garnet, iron oxide yellow, bean cake, fertilizer, Compound fertilizer, bituminous coal, coking coal, lignite, magnesite, chrome oxide green, gold ore, red mud, clay, kaolin, coke, coal gangue, china clay, kyanite, fluorite, bentonite, medical stone rhyolite, Various non-flammable and explosive mineral products with a Mohs hardness of 9.3 or less and a humidity below 6%, such as greenstone, pyrophyllite, shale, purple sandstone, stacked rock, basalt, gypsum, graphite, and thermal insulation materials.

YGM High Pressure Grinding Mill
YGM High Pressure Grinding Mill characteristics:
1. Compared with other mills, the high-pressure medium-speed mill increases the output by 10-20% under the same dynamic conditions. The grinding pressure of the grinding roller on the material is increased by 800-1200kg under the action of the high-pressure spring.
2. Mineral products with Mohs hardness less than 9.3 can be processed and crushed.
3, the finished product has a wide range of particle size, the particle size zui can reach 0.613 mm (30 mesh), the particle size can generally reach 0.033 mm (425 mesh), and a small amount of material can reach 0.013 mm (1000 mesh).
4. The dust removal effect of the high-pressure medium-speed mill completely meets the national dust emission standards.
5, the analysis machine is easy to adjust.
6. The grinding device of the high-pressure medium-speed mill adopts overlapping multi-stage sealing and has good sealing performance.

Parameters

Model Grinding Roller Grinding Ring Feeding
Size
(mm)
Output Size
(mm)
Capacity
(t/h)
Motor
Power
(kw)
Overall Dimension
(mm)
Numbers
(pcs)
Diameter
(mm)
Height
(mm)
Outside Diameter
(mm)
Height
(mm)
YGM75 3 260 150 865 150 <15 0.613-0.033 0.4-3.1 35.7 5000×
4100×
4850
YGM85 3 270 140 907 140 <20 0.613-0.033 0.5-4.0 42.7 5150×
5000×
5200
YGM95 4 310 170 1050 170 <25 0.613-0.033 1.1-5.6 72.5 7550×
7400×
8100
YGM130 5 410 210 1400 210 <30 0.613-0.033 2.2-9.5 172.5 8510×
8000×
9645
YGM160 6 440 270 1740 270 <35 0.613-0.033 8-22 275 12550×
5700×
8355

Principle

Working Principle

The High-pressure Suspension Mill has the same working principle as Raymond Mill, but its grinding fitting is furnished with 1000 - 1500 kg pressure spring.
When the machine works, the grinding roll, under the action of high pressure spring and centrifugal force, rolls close up to grinding ring, its rolling pressure ratio is 1.2 times of Raymond mill given an identical condition, and its output may increase 10% to 20%;Please note that when the grinding roller and grinding ring reach a certain degree of abrasion, please adjust the length of high-pressure spring to keep the constant grinding pressure between grinding roller and grinding ring, so as to ensure a stable output and fineness.

Faq-may you want to kown

Q1. How long is the warranty of your equipments? Does your company supply the spare parts?

The warranty period of crusher equipments is 12 months. Yes, we supply the spare parts for you at lowest cost and we have a professional after-sale service team to promptly and thoroughly solve your problems.

Q2. What Information should customers give us? So that we can be able to provide you suitable solution and equipments.

1. What's the capacity you prefer? ( such as 150TPH etc ) 2. What is the raw material you want to process? ( such as andesite, basalt, etc ) 3. What is the input size of your raw material? 4. What's the final product size do you want?

Q3. Can you test our samples? Do you provide beneficiation flow chart?

Yes. You can send your samples to us for test and analysis. Our experienced engineers are specialized in designing process flow for various ores beneficiation, including iron ore, tin ore, copper ore, gold ore, lead zinc ore, manganese ore, etc.

Q4. If I need the complete crushing plant can you help us to build it?

Yes, we can help you combine a complete crushing line and give you related professional advices as long as you need. We had already build many mining projects in China & Overseas.

Send Enquiry

Please enter your requirement and contact information and we'll get back to you as soon as possible.

Your Email
Your Phone/Whatsapp *
Country
Product
Message

30 seconds for connecting online customer service

within 24 hours for getting email reply

factory-direct sale, 100% factory price

Top