

Energy Saving Ball Mill
Max Feeding size30-1250(kW).
Capacity0.17-100tph.
Applicable materialsilicate products, new building materials, refractory materials, fertilizer..
you can contact us.
Ball mill is the key equipment for grinding of crushed materials. It is mainly used in cement, silicate products, new building materials, refractory materials, fertilizer, ferrous and non-ferrous metal ore beneficiation, glass ceramic, etc. Besides, according to the discharging method, the ball mill can be divided into grate type and overflow type; according to the grinding method, the ball mill can be divided into the wet type and the dry type. The ball mill is applied to grind ores and other materials, and can be widely used in areas such as ore beneficiation, building materials, chemical industry, etc.
Consignment:
1. The large ball mill is equipped with a jacking device for easy maintenance;2, large ball mill with slow speed transmission, easy to repair and start;
3, large ball mill size gears are oil mist lubrication, to ensure reliable lubrication of large and small gears, extend the life of large and small gears, save oil;
4. The large ball mill has an air clutch and adopts a flexible start to reduce the impact of the ball mill start on the selected power grid.
Parameters
Model | Cylinder speed(r/min) | Ball load(t) | Feed size(mm) | Discharge size(mm) | Capacity(tph) | Weight of main engine (kW) | Weight(t) |
1200x2400 | 36 | 3 | ≤25 | 0.074-0.6 | 1.4-2.8 | 30 | 11.4 |
1200x3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-3 | 37 | 12.1 |
1200x4500 | 32.6 | 5 | ≤25 | 0.074-0.4 | 1.83-3.9 | 55 | 13.1 |
1500x4500 | 27 | 11 | ≤25 | 0.074-0.4 | 4.8-11 | 90-110 | 199 |
1500x5700 | 28 | 12 | ≤25 | 0.074-0.4 | 5--16 | 130 | 23.4 |
1830x2400 | 25.4 | 10 | ≤25 | 0.074-0.4 | 4--10 | 130 | 23.7 |
1830x3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4.5-10.5 | 130 | 26.6 |
1830x4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 68-11.5 | 155 | 30.4 |
1830x6000 | 24.1 | 21 | ≤25 | 0.074-0.4 | 7--12 | 210 | 32.3 |
1830x7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.8-13.8 | 245 | 34.2 |
2100x3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 5.8-14 | 155 | 32.3 |
2100x4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 9.5-32 | 245 | 40 |
2100x6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 | 50.3 |
2100x7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 51.3 |
2100x7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 53.2 |
2400x3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7.8-18 | 245 | 51.3 |
2400x4500 | 21 | 30 | ≤25 | 0.074-0.4 | 13.7-28 | 320 | 64.7 |
2700x4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 15-28 | 400 | 89 |
2700x4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 16.5-36 | 430 | 97 |
3200x4500 | 18 | 65 | ≤25 | 0.074-0.4 | 24-49 | 800 | 130.5 |
3600x4500 | 17.8 | 88 | ≤25 | 0.074-0.4 | 29-65 | 1250 | 165 |
Principle
The materials are evenly conveyed from the feeding device to the first cabin of through the feeding hollow shaft. Inside the first cabin, there are stepped or ripple liners installed and different-sized steel balls placed. When the cylinder rotates, the balls are lifted up under the effect of centrifugal force, and cascade down from near the top of the cylinder. In doing so, the materials are reduced in size by impact and grinding. Then, going through the monolayer welt, coarse materials enter into the second cabin lined with plane liners and placed with steel balls. What needs to be noted is that it is exactly at the second cabin that materials get further grinding until they meet the required particle size. When powdery materials discharge from the grid plate, the operation of grinding comes to an end.
Faq-may you want to kown
Q1. How long is the warranty of your equipments? Does your company supply the spare parts?
The warranty period of crusher equipments is 12 months. Yes, we supply the spare parts for you at lowest cost and we have a professional after-sale service team to promptly and thoroughly solve your problems.
Q2. What Information should customers give us? So that we can be able to provide you suitable solution and equipments.
1. What's the capacity you prefer? ( such as 150TPH etc ) 2. What is the raw material you want to process? ( such as andesite, basalt, etc ) 3. What is the input size of your raw material? 4. What's the final product size do you want?
Q3. Can you test our samples? Do you provide beneficiation flow chart?
Yes. You can send your samples to us for test and analysis. Our experienced engineers are specialized in designing process flow for various ores beneficiation, including iron ore, tin ore, copper ore, gold ore, lead zinc ore, manganese ore, etc.
Q4. If I need the complete crushing plant can you help us to build it?
Yes, we can help you combine a complete crushing line and give you related professional advices as long as you need. We had already build many mining projects in China & Overseas.
Send Enquiry
Please enter your requirement and contact information and we'll get back to you as soon as possible.
30 seconds for connecting online customer service
within 24 hours for getting email reply
factory-direct sale, 100% factory price